Skip to main content

Eastman 2380(Case of 24 Quart Cans)

(No reviews yet) Write a Review

$648.00
SKU:
BP2380-CASE
Condition:
New
Availability:
In stock. Usually Ships in 24 to 48 Hours
Shipping:
Calculated at Checkout

Eastman Turbo Oil 2380 (formerly BP 2380)

Eastman Turbo Oil 2380 is a 5 cSt synthetic lubricant that is approved against US military specification MIL-PRF-23699F STD, and UK military specification DEF STAN 91-101/2 (replaced DERD 2499). This lubricant provides a balanced combination of thermal and oxidation stability, load carrying capacity, lower volatility and has the best low temperature flow characteristics of all 5 cSt turbine oils. Eastman 2380 is our best selling turbine oil. Try it today.

Applications & Approvals

Eastman Turbo Oil 2380 is recommended for the lubrication of most aircraft gas turbines and accessories. It is also recommended for the lubrication of aero-derived gas turbines in industrial power generation, offshore and marine applications.

Eastman Turbo Oil 2380 has been approved by a wide range of engine and accessory manufacturers for their applicable equipment, including:

Rolls-Royce Ltd, Rolls-Royce Allison, GE, Pratt & Whitney, Pratt & Whitney Canada, Honeywell, Hamilton Sundstrand, CFMI, IAE, MTU, Solar and Turbomeca.

Features & Benefits

Viscosity: Eastman Turbo Oil 2380 has the best low temperature viscosity properties among all 5 cSt oils.

Cleanliness: Minimum formation of varnish and sludge deposits over long periods of use.

Seal Material Very benign to commonly used seal materials in gas turbines. Compatibility:

Load Carrying Eastman Turbo Oil 2380 is among the best of its class and provides excellent Capacity: protection to bearings, gears, and other highly loaded lubricated surfaces.

Bulk Stability: Its high degree of oxidation resistance permits a long period of operation without significant increase in viscosity and/or total acidity.

Eastman Turbo Oil 2380 Test Method Result
Density @ 15�C, Kg/l ASTM D1298 0.9749

Kinematic Viscosity, cSt, mm2/sec
@ 100�C
@ 40�C
@ -40�C

ASTM D445
ASTM D445
ASTM D-2532

4.97
24.2
7950
Pour Point, �C ASTM D97 -57
Flash Point, �C ASTM D92 265
Total Acid N�, mgKOH/g SAE-ARP5088 0.43
Evaporative Loss, % (6.5h, 204�C)ASTM D9723.0
Foaming Characteristics
Sequence 1 @ 24�C
Sequence 2 @ 93�C
Sequence 3 @ 24�C
ASTM D892
9/0
8/0
8/0
Load Carrying Ability, IAE Gear Machine, %
Ref Oil A
2000 rpm
6000 rpm
IP166

99
86
Rubber Swell, %
Nitrile Rubbe, 192h @ 130�C
Viton Rubber, 192h @ 200�C
Silicone Rubber, 192h @ 175�C
Viton LCS Rubber, 192h @ 200�C
DERD Test, Method 4
10.5
22.5
10.5
14


Related Products